My Cart
You have no items in your shopping cart.
Rewmar glue and accesories
Rewmar has been developed as a floor system in response to the demand for a cost effective flexible wood flooring adhesive that is environmentally friendly and meets all of the highest requirements for the forward thinking wood flooring contractor who requires a product that is suitable for all species of wood and for all solid substrates without costing the earth.
7 Item(s)
View as: List Grid
-
MS600 Adhesive Sausages 12 x 1Kg 1.6m2
Features:
Rewmar MS600 is a one part, modified silane based flexible wood flooring adhesive. It is suitable for sticking down any species of wooden flooring to almost any subfloor. When dry it has a high bond strength between the wooden floor and the subfloor but remains permanently flexible. This allows the flooring to move as the seasons change but it will not crack, and the floor will stay adhered to subfloor. If any adhesive is left on the surface of the wood it is easy to remove either wet or dry (following day) and no special chemicals are required. This product is recommended for use with all types of underfloor heating. Learn More -
Rewmar 6mm (B11) V Notch Trowel
Rewmar 6mm (B11) V Notch Trowel
Pack Size:
Sold individually
Features:
Rewmar 6mm (B11) V Notch Trowel is used to apply Rewmar MS Polymer Adhesive when a fully bonded system is required.
RRP £5.50 +VAT Learn More -
Rewmar Applicator Gun
Rewmar Applicator Gun is used in conjunction with Rewmar MS/P600. Ensure a 8mm deep, 10mm wide V is cut in the end of the plastic nozzle before applying to the subfloor.
RRP £16.25 +VAT
Available to hire From £3.25 Per day +£16.25 refundable deposit Learn More -
Rewmar Hand & Tool Wipes (75 Wipes)
Rewmar Hand & Tool Wipes (75 Wipes)
Features
Heavy-duty non-woven wipes impregnated with a liquid formula for removing Rewmar MS Polymer adhesive and other associated soils such as inks, sealants, oils and greases from hands, tools and general hard surfaces.
Please Note:
Rewmar hand & tool wipes are suitable for all non porous surfaces. A preliminary compatibility test is necessary as some paints and powder coatings can be affected by the wipes. Do not use on porous surfaces such as untreated Learn More -
Rewmar MS Polymer Adhesive
Rewmar MS Polymer is a one part, modified silane based flexible wood flooring adhesive. It is suitable for sticking down any species of wooden flooring to almost any subfloor. When dry it has a high bond strength between the wooden floor and the subfloor but remains permanently flexible. This allows the flooring to move as the seasons change but it will not crack, and the floor will stay adhered to subfloor. If any adhesive is left on the surface of the wood it is easy to remove either wet or dry (following day) and no special chemicals are required.
Smaller pack size – only 6kg of adhesive open at a time
Environmentally friendly – recyclable aluminium and cardboard packaging
Less waste – no more split tubs
New formula – Faster, Stronger
Must be applied using 6mm V notch trowel.
RRP:£63.00 +VAT Learn More -
Rewmar MS Polymer Adhesive 16kg
Rewmar MS Polymer Adhesive is a flexible flooring adhesive that is suitable for the installation of any wooden floor to almost any subfloor. The 16kg product will cover approximately 1m² per Kg of adhesive. It is packaged in one tub ready to use
Rewmar MS Polymer is a one part, modified silane based flexible wood flooring adhesive. It is suitable for sticking down any species of wooden flooring to almost any subfloor. When dry it has a high bond strength between the wooden floor and the subfloor but remains permanently flexible. This allows the flooring to move as the seasons change but it will not crack, and the floor will stay adhered to subfloor. If any adhesive is left on the surface of the wood it is easy to remove either wet or dry (following day) and no special chemicals are required.
RRP:£84.00+VAT (£5.25 per kg) Learn More -
Rewmar RP – PU Rapid Primer 5Kg 15 – 20m²
Rewmar RP is a fast drying, one part polyurethane based primer. It is designed for use with all Rewmar MS Polymer products. It can be used as a moisture barrier when applied on subfloors with a CM up to 5% and 2 – 3 coats must be applied. Depending on site conditions drying time is 45 – 60 minutes per coat.
Application
Rewmar RP can be applied on concrete screeds containing up to 98% RH with three coats. This product is not suitable for use with bitumen substrates, you must use Rewmar MB.
1 Coat: Rewmar RP can be used as fast drying adherence primer on porous / non-porous or smooth substrates (ceramic tiles, adherent and cohesive paints, traces of old glues, etc.). It can be applied either before or after applying a screed/latex but before applying Rewmar MS Polymer adhesive.
2 -3 Coats: Applied in cross layers, Rewmar RP can be used as a moisture barrier for waterproofing of absorbent surfaces up to 98%RH. Note: if the Concrete Moisture is over 75%RH and a liquid batten installation is performed then Rewmar MB must be used.
This product is suitable for use with Underfloor Heating. Learn More
7 Item(s)
View as: List Grid